Read All Instructions Prior to Installation

Check all parts for defects or burrs and fit before installing

Components:

• Painted Grille Eliminator Trim Piece
• Cobra Grille Opening
• Mustang Horse with Bracket
• (2) Remover "Self"-Tapping Screws

Tools Required:

• Phillips Screw Driver
• 7mm Socket
• Ratchet

GRILLE ELIMINATOR INSTRUCTIONS

Grille Eliminator

A. Remove Stock Grille

1. Remove 4 plastic screw retainers along top edge of grille (save 2 re-use)*

2. Remove 2 plastic screw retainers on each side stock grille securing tabs of Fascia (save remove "2" for re-use)*

3. Bend grille forward enough to access the four 7mm bolts on bottom side of grille and remove bolts.

*Use very little pressure pushing down when unscrewing retainers

 Grille Eliminator Install

B. Install painted Grille Eliminator

1. Insert Black Cobra Grille Opening piece into grille opening and attach with 2 plastic push type retainers

2. Slide tabs of grille eliminator onto the front fascia and secure with two plastic screw retainers, along with Fascia tabs.

3. Install the horse with bracket into center of grille opening with the two provided screws.  (This bracket also aids holding in the black grill opening in place.)