|
|
Chassis
1987-2004 |
 |
|
|
|
|
|
View Larger Image |
Lower Springs |
|
Aggressive Linear rate rear spring: The rear
springs finish lowering your Mustang and manage the balance
between performance and comfort.
The H&R Springs give your Mustang an aggressive
stance with superior balanced handling while
maintaining your ride quality
|
|
|
|
|
View Larger Image |
Caster Camber
Plates 79-93 |
Take
charge of your fox chassis front suspension by using this set of
independently adjustable caster and camber plates. Caster/camber plates replace the stock flexible rubber strut mount
bushings, allowing you ultimate control of the suspension geometry.
Whether you want your fox chassis set for track, street, or strip, these
plates will allow you to fine tune your suspension so you can get the
most out of your car. These plates are infinitely adjustable and they
are 100% MIG welded for the ultimate in strength and durability. They
also feature replaceable teflon lined spherical bearings for a noise
free quality ride.
Limited Lifetime warranty on bearing and plate! |
|
View Larger Image |
Caster Camber
Plates 94-04 |
Take
charge of your fox chassis front suspension by using this set of
independently adjustable caster and camber plates. Caster/camber plates replace the stock flexible rubber strut mount
bushings, allowing you ultimate control of the suspension geometry.
Whether you want your fox chassis set for track, street, or strip, these
plates will allow you to fine tune your suspension so you can get the
most out of your car. These plates are infinitely adjustable and they
are 100% MIG welded for the ultimate in strength and durability. They
also feature replaceable teflon lined spherical bearings for a noise
free quality ride.
Limited Lifetime warranty on bearing and plate! |
 |
Subframe Connectors |
The DOUBLE-CROSSTM
SUBFRAME CONNECTORS or better known as “SUPER SUBS” improve
handling, feel, weight transfer and extend the life of the Mustang by
reducing power-robbing chassis flex. The Double-CrossTM subframe
Connectors is the foundation to any suspension or chassis upgrade.
Technical:
- Weld-in application for long-term stability
- Made of heavy gauge mild steel
- Finished in OE quality, rust-resistant plating
- Professional help and/or welding experience recommended for
installation |
|
|
|
 |
Upper Control Arms |
|
Street/Race Performance Upper Control Arms provide maximum
strength and torsion rigidity for all of your driving needs. Designed to
reduce axle whip and wind up during acceleration and cornering. They are
manufactured from round, not rectangle, 1.75" steel tubing and come with
zerk fittings to allow for greasing of the genuine Energy Suspension
polyurethane bushings which are far superior to the stock rubber pieces
they replace. These uppers are powder-coated in black for a long lasting
finish. |
|
|
|
View Larger Image |
Lower Control Arms |
Unique 3 piece bushing features: High durometer
center bushing for reducing wheel hop. Softer side bushings to allow the
control arm and axle to move without flex. Street and Street/Race performance trailing arms provide maximum
strength and torsion rigidity for all of your very high performance
street or race driving needs. They are manufactured from round, not
rectangular steel tubing.
The Street/Race Trailing Arms come equipped with special teflon
lined spherical bearings on the axle side, and greasable
polyurethane bushings on the chassis side.
The Street Arms come with polyurethane bushings on both
ends and zerk fittings. Our street performance trailing arms come
powder-coated black and are built to the same tolerances as our race
performance arms. |
|
 |
Tokico Shocks and Struts |
|
HP "BLUES" Tokico's high performance struts and shocks feature Tokico's high performance struts and shocks feature the same high
quality as their top-of-the-line Illumina shocks in a less expensive
non-adjustable package. Their dampening is tuned to a firm "sport" mode
for maximum control without being harsh. These are the pieces we use in
our MRT Street Performance Package. |
|
 |
Illumina Shocks and Struts |
|
Tokico's advanced valving gives a smooth ride and the wide range of
adjustment lets you select your favorite blend of comfort and control.
They adjust easily from the top of the shock or strut; the whole car can
be adjusted in less than a minute. Five distinct positions ensure
accurate and repeatable adjustments, time after time. When it comes to
shocks, nothing else even comes close. They come with a lifetime
warranty |
|
